NO PROBLEM A partner who puts everything at the core.
The noble and unrivaled view of the world has renewed the BERES image.
Achieves overwhelming high performance and high quality at the highest level in history.
It is the one and only existence that will be your “buddy” in pursuit of the ultimate.
Strong and beautiful BERES wearing the dignity of world-class Japanese beauty
3D L-CUP Face (# 5- # 9)
Achieves high resilience performance over a wide range of faces.
By thickening the sole part, the center of gravity is lowered and the launch angle is increased.
High repulsive force is generated by the slits on the outside and inside of the sole.
In addition, the slit on the outer toe exerts a repulsive effect at the off-center RBI near the toe.
In addition, the wide sole realizes a high launch angle with a low center of gravity.
Vertical slit uneven thickness face
The face is thinned to the utmost while maintaining the strength of the face by the vertical slit-shaped uneven thickness. As a result, the repulsive force is increased, and the tolerance for hitting point blur is realized with a stable shot with high flight distance performance.
Cavity structure with deep and low center of gravity to create the ideal trajectory
By expanding the scooping range at the bottom of the cavity, a deeper and lower center of gravity is achieved. Furthermore, by changing the gouge according to the count, the ideal trajectory required for each can be obtained.
Adopting new material that balances running and stability -ARMRQ MX shaft-
A consistent swing trajectory is achieved by winding the newly developed material “10-axis braided cloth sheet” with high compressive strength around the bat side and accelerating the crushing and returning movement of the shaft during the swing. The counterbalance effect is improved and the swing speed is improved. Increasing the strength of the shaft sheet makes the swing path constant and enables accurate shots.
Directional stability of the trajectory due to stable head behavior
Image of directional stability due to difference in shaft grade at off-center hit.
Comparison of the trajectory hit by removing 20 mm from the center of gravity to the heel side and toe side respectively.
Directional stability increases in proportion to the shaft grade.
Accelerate head running at impact
Due to the difference in materials and design used due to the upgrade, the flight distance performance due to the increase in swing speed is demonstrated with higher accuracy.
|Count / Loft angle (°)||# 5/24||# 6/27||# 7/30||# 8/34||# 9/38||# 10/43||# 11/49||SW / 56|
|Head material / manufacturing method||Body: 17-4 / Casting Face: # 5- # 9 AM355P / Casting / # 10-SW ES235 / Rolling|
|Head finish||2-layer plating + satin finish + mirror + paint finish (silver color)|
|Rye angle (°)||61.0||61.5||62.0||62.5||63.0||63.5|
|Offset (mm)||4.0 4.0||3.5 3.5||3.0 3.0||2.5|
Gross weight (g)
|ARMRQ MX 2S||L||C1 / 333||C1 / 339||C1 / 345||C1 / 351||C1 / 357||C1 / 363||C1 / 369||C2 / 373|
* Marks are for orders
made in Japan
|model||ARMRQ MX 2S|
|Tip diameter (mm)||9.3|
|Butt diameter (mm)||14.3|
* Data is for IRON shaft alone
|name||GR HONMA RUBBER 36 GD|
|Gross weight (g)||36.0|